General Electric 36A171014AAP11 carbon brush

Need a custom part? Send us your drawing, sample or part number — we'll reply with a quotation within 24 hours. Request a quote →

Carbon Brushes

General Electric 36A171014AAP11 carbon brush

Part No. 36A171014AAP11

OEM-style replacement carbon brush for General Electric DC motors (GE 5CD362/363/372/373 series; paper-mill and extruder drive duty). Two-wafer electrographitic assembly, per-wafer 1.25" × 1" × 2.625" (31.75 × 25.4 × 66.7 mm), with 4" flexible copper shunts; cross-references GE 36A171014AAP11 and Repco REP558W.

Material	Electrographitic (EG)
Dimensions	- Thickness: 1-1/4" (31.75 mm) - Width: 1" (25.4 mm) - Length: 2-5/8" (66.7 mm) - Wafer configuratio
Application	Replacement carbon brush for General Electric DC motors — the OEM-fitment series includes GE 5CD362…, 5CD363…, 5CD372… and 5CD373… DC motor models (per OEM cross-reference). Electrographite brushes suit general industrial commutator duty on DC machines at
Current Density	10–12 A/cm²
Speed	Maximum peripheral speed ≤ 50 m/s
Grade	Morgan grade T559

Compatible Models

GE 36A171014AAP11 (OEM part number) GE 5CD362… series (5CD362etc.) GE 5CD363… series (5CD363etc.) GE 5CD372… series (5CD372etc.) GE 5CD373… series (5CD373etc.) GE 36A171014AAP12 (same-series 2-wafer variant — verify grade/shunt) Repco REP558W (aftermarket cross-reference) GE DC machines using a 1.25" × 1" × 2.625" 2-wafer electrographite brush with a 4" shunt

Request a Quote Related Products

48h Sample Dispatch 60+ Countries Served Datasheet Included

Technical Specifications

Specification	Value
OEM Part Number	GE 36A171014AAP11
Aftermarket Reference	Repco REP558W
Product Type	Motor carbon brush (2-wafer assembly)
Material	Electrographitic (EG)
Grade	Morgan T559; aftermarket designation D374F
Thickness	1-1/4" / 31.75 mm (per wafer)
Width	1" / 25.4 mm (per wafer)
Length	2-5/8" / 66.7 mm (per wafer)
Wafer Configuration	2 wafers
Wafer Size	31.75 × 25.4 × 66.7 mm (each)
Shunt Length	4" / ≈102 mm
Lead Type	Flexible tinned copper braid, with terminal
Voltage	Not rated (N/A)
Current Density	10–12 A/cm² (typical, electrographite group)
Max Surface Speed	≤50 m/s (typical, electrographite group)
Hardness	Not published (typical electrographite Shore 30–50)
Spring	Not included (brush-holder supplied)
Compatible Models	GE 5CD362 / 5CD363 / 5CD372 / 5CD373 series
Application	GE DC motors — paper-mill & extruder drives
Compatible Brand	General Electric

Compatible Models

This General Electric 36A171014AAP11 carbon brush is designed as a direct replacement for the following machine models and series:

Not sure if it fits your machine? Send us your equipment model, motor type or original part number — our engineers will confirm compatibility and advise the correct grade. Ask an engineer →

Description

This General Electric 36A171014AAP11 carbon brush (aftermarket reference Repco REP558W) is a direct replacement for GE brushed DC machines, with OEM fitment on the GE 5CD362, 5CD363, 5CD372 and 5CD373 motor series — commonly used in paper-mill and extruder drive applications. The brush is supplied as a two-wafer assembly, each wafer pressed from electrographite (Morgan grade T559). The material delivers low electrical loss, medium contact drop and stable film formation, giving reliable commutation and even wear in continuous industrial duty.

Features & benefits:

OEM-matched 2-wafer configuration — per-wafer 1.25" × 1" × 2.625" (31.75 × 25.4 × 66.7 mm), drop-in fit for GE 5CD362/363/372/373 brush holders.
Electrographite material, Morgan grade T559 — low electrical loss, medium contact drop, low-to-medium friction, suitable for higher peripheral speeds.
4" flexible copper shunts — tinned braided leads with terminals for reliable, balanced current sharing.
Cross-referenced part numbers — GE 36A171014AAP11, Repco REP558W; fitment on GE 5CD362/363/372/373 series.
Typical applications — paper-mill and extruder DC drives.
Quality-inspected before dispatch: wafer dimensional check, lead crimp integrity, and surface condition per batch.